Cheefarcuut-Lederstreichriemen zum Messerschärfen, vorgespannt mit Diamantpoliermitteln, doppelseitig, echtes Rindsleder, Messerschärfriemen, Messer-Abziehblock, 15,7 x 3,1 Zoll
Normaler Preis
Normaler Preis
Verkaufspreis
$29.90 USD
Grundpreis
pro
Ships from USA
Free US shipping
Ships with full tracking
Verfügbarkeit für Abholungen konnte nicht geladen werden
Buy on Amazon
🔒 Secure checkout with Visa, MasterCard, Amex, PayPal & Shop Pay
Cheefarcuut: Razor Sharp,Burr‑Free Edge.
⚡ Dual‑sided genuine cowhide (Coarse + Smooth)
💎 Pre‑applied diamond compound (ready to use)
🔪 25ml diamond spray (0.25µm)
📏 Extra‑large surface: 250×80mm (≈9.8×3.1")
💪 Tabletop + handheld with anti‑slip stand
Target Use
🍳 Home & Professional Kitchens
🏕 Outdoor & EDC Players
🪵 Woodworking & Other Professionals
💪 VG10, SG2, CPM110V, REX121 & Super Steels
🔪 The final step after sharpening stones
Compatibility & Capacity
Knife Compatibility:
🧪 From standard stainless to the hardest super steels.
🔪 Kitchen knives, outdoor knives, EDC folders, Leather cutting knives, Woodworking knives, Straight razors, tools,
Build Quality & Materials
💎 Secret: 0.25um Diamond Spray
🧪 Leather: dual‑sided genuine cowhide
🧱 Blade range: 1–15"
🧰 Use: tabletop + handheld
📏 Size: 250×80mm (≈9.8×3.1"), 0.12" Thick
🇭🇰 HK Design | 🇨🇳 Made in China
Included in the Box
Ready to use, all essentials included:
💎 Dual‑sided leather strop
🪵 Anti‑slip stand
💦 25ml 0.25µm diamond spray
📘 User Guide
Join the Community
Use & Care
1. Use: For removing large, soft burrs; pre-coated with 0.25 um diamond. Darkeningfrom swarf is normal.
2. Service: After ~50 knives, performance tapersbrush off embedded swarf with astiff bristle brush, then reapply Cheefarcuut Diamond Spray to restore and extend life.
3. Wear: strop surface is consumable-replace at ~500 knives (burr punctures reduceeffectiveness).
4. Care: Keep dry-water can shrink the substrate and wash off abrasive, reducingstropping effectiveness.
2. Service: After ~50 knives, performance tapersbrush off embedded swarf with astiff bristle brush, then reapply Cheefarcuut Diamond Spray to restore and extend life.
3. Wear: strop surface is consumable-replace at ~500 knives (burr punctures reduceeffectiveness).
4. Care: Keep dry-water can shrink the substrate and wash off abrasive, reducingstropping effectiveness.
Customer Service
🤝Chat with us - real human support
📩 support@cheefarcut.com
📩 support@cheefarcut.com
The Final 1% to Razor Perfection.
Just the Strop You Need.
Cheefarcuut Leather Strop,
Razor Sharp, Burr‑Free Edge,
The Final Step After Sharpening.
Razor‑Sharp Feel in a Few Passes
Sharpening stones create the edge and burrs.
A strop removes the burr.
Burr-free edge after 3 passes on double side.
Nano-Diamond Suspension Technology
0.25µm for ultra‑fine finishing
Pre‑applied diamond compound, ready to Use
Even distribution without clumping
25ml Diamond Spray
~160 sprays per bottle
2 sprays: hone 5–10 knives
Can handle 400+ knives (usage varies)
Ready to Use
Clean, Even, No Clumps
Clean, Even, No Clumps
No heating
No rubbing paste bars
Save about 10 minutes
Almost Compatible with All Knives
Leather cutting knives
Outdoor knives
Woodworking knives
Straight razors
Engineered for Any Blade
Works with All Steels, Any Stones
Massive Surface Area
9.8" x 3.1" (250mm x 80mm)
0.12 in (3mm) solid leather
Works for 1–15" blades
Fewer passes, Easier control
Premium Double-Sided Cowhide
Firm Side: Removes Fine & Hard Burrs
Soft Side : Removes Large & Soft Burrs
Stability First
Elevated support frame
More hand space
Tabletop or handheld use
0°–90° Precision Control Stand
Don't Take Our Word For It
Check the Community and Test By yourself
Science Behind
Edge Transformation Process
Edge Transformation Process
Passivated edge: identify dull, rounded tips
Burr formation: raise and detect burrs
Sharp apex completion: remove burrs
Verified by Knife Forums,
Tested by Enthusiasts
Tested by Enthusiasts
Achieve sub-100 BESS across user tests
Confirmed by sharpeners like Rramski and Zylok
Beginner Guide
1.Start with soft side to remove large burs
2.Spray the diamond honing mist on the smooth side
3.Then with firm side to remove harder burrs
4.Keep the angle consistant with the sharpening angle
5.Use light pressure
Pros Make Pros For Pros
Four-generation craft lineage sinces 1925
In-house development based on field experience
Process optimization over years
×
![Full view]()
Frequently Asked Questions
Get the answers you need — strop with confidence.
Can this replace a sharpening stone?
No. A stone shapes the bevel and raises a burr.
A strop is the final step: it removes burrs and refines the apex.
A strop is the final step: it removes burrs and refines the apex.
Do I need to raise a burr before stropping?
Yes. Burr first, strop second.
If there is no burr, stropping will feel “no change”.
If there is no burr, stropping will feel “no change”.
How many passes should I do?
Start small.
Soft side: 3–10 light pulls per side.
Firm side: 3–10 light pulls per side.
Stop when the edge feels clean. Don’t over-strop.
Soft side: 3–10 light pulls per side.
Firm side: 3–10 light pulls per side.
Stop when the edge feels clean. Don’t over-strop.
What stroke direction should I use?
Use edge-trailing strokes only.
Spine leads, edge trails. No back-and-forth.
Keep the same angle you used on the stone.
Spine leads, edge trails. No back-and-forth.
Keep the same angle you used on the stone.
How much pressure should I use?
Light pressure wins.
Reference: about 200–300 g (≈ 0.45–0.66 lb).
Too much pressure rounds the apex and reduces bite.
Reference: about 200–300 g (≈ 0.45–0.66 lb).
Too much pressure rounds the apex and reduces bite.
What is the 0.25µm diamond spray for? How often should I use it?
It’s for ultra-fine finishing and quick refresh.
Use 1–2 sprays, then 3–5 light pulls per side.
Reference: 2 sprays can hone about 5–10 knives (varies by steel/condition).
Use 1–2 sprays, then 3–5 light pulls per side.
Reference: 2 sprays can hone about 5–10 knives (varies by steel/condition).
Can I spray both sides?
Yes. Both sides can be sprayed.
My knife feels less sharp after stropping. Why?
Most common causes:
1) No burr from the stone
2) Too much pressure
3) Too many passes
4) Angle drifting
Fix: raise a burr first, then use fewer passes with lighter pressure.
1) No burr from the stone
2) Too much pressure
3) Too many passes
4) Angle drifting
Fix: raise a burr first, then use fewer passes with lighter pressure.
How do I clean and store the strop and spray?
Wipe the leather lightly after use. Keep it dry and dust-free.
Store the spray upright with the cap on.
Avoid direct heat and long sun exposure.
Store the spray upright with the cap on.
Avoid direct heat and long sun exposure.
How Do l Choose The Correct Sharpening Angle For Different Knives？
Angle defines edge character — not right or wrong, just trade-offs:
10–12°/side: Japanese gyuto, slicers, razors — ultimate bite, lower durability
15–18°/side: western chef knives, petty — balanced edge
20°+/side: outdoor, cleaver, work knives — max durability
You can use the Angle Reference Wedge included, or a guided sharpener (our Cheefarcuut Guided Knife Sharpener) if you want precision and repeatability.
Pro tip: stick to one consistent angle family across your knives — it simplifies burr management and speeds up the entire progression.
For more specific angle recommendation, check our digital manual.
10–12°/side: Japanese gyuto, slicers, razors — ultimate bite, lower durability
15–18°/side: western chef knives, petty — balanced edge
20°+/side: outdoor, cleaver, work knives — max durability
You can use the Angle Reference Wedge included, or a guided sharpener (our Cheefarcuut Guided Knife Sharpener) if you want precision and repeatability.
Pro tip: stick to one consistent angle family across your knives — it simplifies burr management and speeds up the entire progression.
For more specific angle recommendation, check our digital manual.
How To Use The Leather Strop Without Scratching？
Keep the stone angle (optionally +1–2° micro-bevel). Use light, even
pressure ≈ 250 g / 0.55 lb.
Orientation & force: tip backward, spine forward, and pull with the spine leading so the edge trails. No back-and-forth. Do 5–10 light pulls per side.
Feel cue: glide as if skimming off a thin layer of sand from the strop.
Orientation & force: tip backward, spine forward, and pull with the spine leading so the edge trails. No back-and-forth. Do 5–10 light pulls per side.
Feel cue: glide as if skimming off a thin layer of sand from the strop.
Why Is The Logo "Cheefarcuut” But The Website Is "Cheefarcut.Com"？
Both are official trademarks with the same mission — bringing
professional sharpness to everyone.